How Much Transmission Fluid to Add If Empty?

How Much Transmission Fluid to Add If Empty

The headache of how frequently transmissions liquid needs to go down your transmission framework is a serious irritation. This is common for beginners who just got themselves to the driver’s seat and know nothing about the mechanical part of a vehicle.

There is a benchmark for too many things, even the transmission fluid needs to be filled in at an appropriate quantity, to get this done relies upon different reasons, a couple of which are the sort of vehicle, the model, and the size of the vehicle also matters.

Therefore, how much transmission fluid to add if empty?

A standard vehicle should take about 4 to 13 quarts amount of fluid to fill up completely. Too little may cause overheating or engine damage and excessive addition may cause various leaks or overflow.

Can You Add Transmission Fluid If Empty for Automatic Cars?

Yes, you can add transmission fluid when it is empty to an automatic car, but at first, you will need to check the level of transmission fluid with a dipstick, if it will require a top-up or a total change.

It is easy to detect a dipstick in an automatic vehicle; it is located close to where the transaxle meets the rear of the engine.

If found, it will require using the dipstick to check the level of the transmission fluid and detect if it will require a little addition to meet the required level or will detect if your transmission fluid level is empty.

You can make it happen if you wouldn’t fret getting your back on a sliding chair and emptying residuals underneath your vehicle, on the off chance that you don’t see getting messy as no joking matter, you can add the transmission liquid yourself, however, assuming you care about your nails and your extraordinary looking body, get an expert technician to finish the work.

Before you add your transmission liquid to your vehicle, guarantee you first check if it is empty or not. On the off chance that it is empty, a refilling will be the best move, and if it isn’t, perhaps a top-up will be the most ideal situation.

Can You Add Transmission Fluid If Empty for Manual Cars?

You can add transmission fluid for manual cars but be sure it will take other than your two hands wiping a dipstick and checking the transmission level.

It will require a thorough check in the car’s manual to be directed on how to make your moves with a sealed transmission. I would suggest getting in touch with a dealer.

Manual cars are stressful, most especially modern ones. It is so hard to find the dipsticks to check the manual transmission fluid; sometimes some manual cars don’t even have a dipstick.

You can assume it is a dealer’s trick to prevent side road mechanics and consumers from messing around with the transmission except for the dealer.

If you are someone who can’t find his way with a manual guide or you’re a total newbie to the mechanical aspect of a vehicle, why not call a mechanic and make the process faster?

How Much Transmission Fluid to Add If Empty?

At first, if you’ve drained out the residual transmission fluid, you can begin adding some fluid to the dark tunnel of your transmission system but if not empty yet, a draining will be required, and afterward, about 4-12 quarts of fluid should be added to fill up again.

To be on the safer side, as you add your transmission fluid, check the level to know when you need to stop or if there will be a need to add more.

When your car doesn’t have enough fluid, it affects the car in gear, preventing it from spinning, and in the worst scenario; it stops the car from moving. A constant check is required to avoid driving a car with an empty transmission.

Excessive transmission fluid may cause leaks and sometimes develop some foamy substance, which is a red flag to your vehicle’s performance.

Your transmission oil is the cell holding your car together. As a car owner, the knowledge of how much transmission fluid needs to go down your vehicle to keep it “healthy” or in a good condition shouldn’t be far from the tips of your finger.

How Do You Fill Empty Transmission Fluid?

Adding your transmission fluid is a normal procedure and will require your two hands and a tiny portion of your memory. It doesn’t have to be technical jargon with various tough procedures, in case you don’t want an expert to fill your empty transmission fluid.

Here is a general procedure that won’t require you to break a sweat;

Have Your Car Parked on a Level Surface with the Engine Active

Ensure you park the vehicle upright on a leveled surface. It might require shifting your car around each of the gears until you’ve gotten a suitable position.

Raise the Hood

Everyone knows how to get the hood up, but if you are a total newbie to a car, in your car is a lever that allows the hood to pop up.

The lever is located close to the left-hand side of the cockpit. If you can’t find it, check your car’s manual.

Find the Automatic Transmission Fluid Pipe and Check the Dipstick

Transmission fluid pipes are with labels. If you can’t easily sight them, check your vehicle’s manual to have a better view.

Depending on what type of wheeled vehicle you own, either a front-wheel vehicle or a rear-wheel vehicle, either way, the car’s manual will show you the right location of the transmission fluid pipe.

After that, pull out the transmission fluid dipstick, have it wiped with a clean rag and check the fluid level again.

Ensure your Transmission Fluid is in Good Condition

The color is a significant observation to save you a lot of stress. Transmission fluid in a good condition is red, pink, or brown. You know it is in a good condition when it doesn’t push out any offensive odor or bubbles.

Drain and then Add Transmission Fluid

Your car can’t be 100% empty of transmission oil, except if there is a leak. If there isn’t a leak, drain the residual and add about three or four quarts of transmission fluid, to avoid getting excessive or little amount of transmission oil, ensure you use your dipstick and you are wiping rag to check at all times when you pour in your transmission fluid.

Add more transmission fluid if needed until your fluid is at the required level.

Can You Fill Transmission Fluid Through Dipstick?

Yes, you can fill transmission fluid through the dipstick. It will however require you to insert a funnel through the transmission fluid pipe and pour some amounts of automatic transmission fluid down the dark pipe.

The dipstick is one of the easiest ways to add your transmission fluid for automatic cars precisely.

What happens if Your Transmission Fluid is Empty?

Your gear gets on your nerves. It stops spinning, which also prevents the car from moving. You shouldn’t allow your transmission fluid to get empty while driving. It will cost you an excessive amount to repair. You should always check your vehicle from time to time.

A morning routine is important for every driver to check through every bolt and visible part of your car engine so as not to meet surprises when taking a drive on the highway.


The amount of transmission fluid in your vehicle is important to the healthiness of your vehicle. You should monitor your car gears if it doesn’t work as expected. It could be a signal to check your transmission fluid if it needs a top-up or a complete drain and replacement.

With your dipstick, you can spell out many details if your vehicle is ripe for a new transmission fluid or if it requires a top-up rather than a refill. This is premium information for every car owner.